P-80 Lubricants can be used for assembly applications in major automotive OEMs
P-80 lubricants are more effective than soap and water and a safer alternative to alcohol and harmful solvent based lubricants. P-80 lubricants provide a high degree of lubricity when wet, but because they do not contain silicon or other persistent ingredients, once dry the slipping action goes away. P-80 is free of petroleum distillates, so they will not dry, crack or otherwise harm rubber parts. P-80 lubricants are compatible with most metals, plastics and natural and synthetic elastomers.
There are a number of rubber and plastic parts that can benefit from using P-80 in the assembly process. Below are a list of rubber assembly applications in major automotive OEMs;
- Heater hose
- Windshield wiper hose
- Upper and lower rad hose
- Brake line
- Window surround
- Trunk seals
- Grommets – automated and manual
- Drive shaft boots
- HVAC hoses
- Wire harness pull throughs
- Isolator brackets
- Door harness
- Automated o-ring and sleeve application
P-80 lubricants are available in four (4) industrial formulas; P-80 Emulsion, P-80 THIX, P-80 Grip-it and P-80 RediLube. Contact us for recommendations on the best formula for your assembly application. Free samples are available upon request by sending an email to firstname.lastname@example.org or calling 609-386-8770..
View the entire line of P-80 lubricants at http://www.ipcol.com.