P-80® THIX Temporary Assembly Lubricant gel is a biodegradable assembly aide that eases installation of tight-fitting rubber and plastic parts by reducing the force needed for insertion. Once assembly is complete, the lubricant dries and the part returns to its original condition. P-80 THIX is especially useful in overhead and vertical assembly operations because it remains where it is applied without dripping. P-80 THIX thins out under pressure so it can be used in automated systems or applied manually by dip, brush, or spray techniques.
P-80 THIX Temporary Assembly Lubricant is used to install hoses, o-rings, seals, bushings, gaskets, grommets, grips, and many other rubber and plastic parts. Use P-80 THIX when a thick coating of lubricant is needed, when it is important that the lubricant stay where it is applied, and/or when a prolonged drying time is desired.
- Typical viscosity of P-80 THIX is 12,000 cps at 25° C
- Provides ~70% reduction of friction
- Estimated minimum dry time is 2 hours
- pH (neat) 7.5 to 9.5
- Appearance is white to beige gel
- P-80 THIX Safety Data Sheet – SDS
- Storage & Handling
- Technical Documents
Contact us for pricing, more information or a free sample for testing in your assembly application.
Telephone: 609-386-8770 Fax: 609-386-8438 Web: www.ipcol.com Email: email@example.com